SGC 420 MkII Firmware

SGC 420 MkII Firmware

You have chosen to download our software.

Within a few seconds, you will receive an email containing a download link.

Having trouble using the software? Please contact support@deif.com. 

Best regards, 

DEIF A/S

The software is subject to copyright DEIF A/S
By following the above mentioned link and downloading the file you automatically accept DEIF A/S copyright and license agreement (EULA). The license agreement can be found on www.deif.com/software

R17.00

New features

  • DTC manager: added as a tool providing options to update SPN and FMI descriptions and ignore specific SPN/FMI codes.
  • Added the ability to display customer details on the boot-up screen through the display language tool.
  • Added Live link for remote display functionality.
  • Introduced a shutdown override function in digital inputs, allowing all shutdown alarms (except emergency stop) to be treated as warnings when activated.
  • Added "Shutdown" as an alarm action in the maintenance module.
  • Added activation and delay timers for custom sensors.
  • Added auto load transfer in manual mode as a separate parameter for mains.
  • Enabled external EGR support through digital input.
  • Added file information to relevant screens.
  • Added EIC data over Modbus.
  • Introduced an alternate nominal AC system.

Changes

  • Added breaker feedback interlock for generator and mains breakers.
  • The breaker status on the display now mimics the contractor / breaker feedback.
  • Nominal AC system configuration moved from alternator configuration to nominal values.
  • Updated Phase reversal handling during the stop sequence.
  • Updated EIC protocols:
      - Improved SDEC protocol handling.
      - Updated MTU ECU9 Eminox protocol.
      - Updated Volvo Stage V protocol.
Description

R17.00

03/02/2025

New features

  • DTC manager: added as a tool providing options to update SPN and FMI descriptions and ignore specific SPN/FMI codes.
  • Added the ability to display customer details on the boot-up screen through the display language tool.
  • Added Live link for remote display functionality.
  • Introduced a shutdown override function in digital inputs, allowing all shutdown alarms (except emergency stop) to be treated as warnings when activated.
  • Added "Shutdown" as an alarm action in the maintenance module.
  • Added activation and delay timers for custom sensors.
  • Added auto load transfer in manual mode as a separate parameter for mains.
  • Enabled external EGR support through digital input.
  • Added file information to relevant screens.
  • Added EIC data over Modbus.
  • Introduced an alternate nominal AC system.

Changes

  • Added breaker feedback interlock for generator and mains breakers.
  • The breaker status on the display now mimics the contractor / breaker feedback.
  • Nominal AC system configuration moved from alternator configuration to nominal values.
  • Updated Phase reversal handling during the stop sequence.
  • Updated EIC protocols:
      - Improved SDEC protocol handling.
      - Updated MTU ECU9 Eminox protocol.
      - Updated Volvo Stage V protocol.

16.00

27/06/2024

New Features

• EIC : Added support of Generic CPCB4+.
• EIC : Added support of Perkins CPCB4+.
• EIC : Added support of Scania EMS2 S6.
• EIC : Added support of Baudouin Gas.
• EIC : Updated SPN description database.
• Added Digital Input functions in M-logic Commands.
• Updated Custom Sensor Range Change to -3000 to 3000
• X (resistance, mA / V) Value in Live data view.
• Added DTC over MODBUS.
• Added Shutdown as fail Class in Maintenance Alarm.

 

Changes

• Run Hour Time available in both hours & minutes.

 

Corrections

• Fixed issue when "Auto Restore Inhibit" & "Mains Load Inhibit" are configured together.

R15.00

28/02/2024

SGC 420 Mk ll offline firmware.

New feature:

• Added these EIC protocols:
• PSI
• Isuzu
• Kohler
• JCB
• JCB 430/448 Stage V
• MAN
• Yuchai
• FPT Stage V
• Perkins Stage V
• Perkins Stage V 1204J
• Cummins KTA19
• Jichai JC15D Weifu
• Jichai WYS
• Jichai JC190
• Jichai JC15T JG
• Deutz EMR 5 Stage V
• Doosan Stage V
• Cummins CM2850
• Weichai e6gas
• Caterpillar ADEM 6
• Yanmar Stage V
• Volvo Stage V
• Volvo Penta EMS2
• MTU J1939
• Iveco Stage V
• Jing guan
• Deutz EMR 4
• Doosan G2 EDC17
• FPT EDC17
• Hatz EDC17
• MAN EDC17
• Perkins EDC17C49
• SDEC
• Steyr EDC17
• Xichai Gas
• YANMAR EDC17
• Yuchai YC-BCR
• Angle
• Baudouin Wise15
• Iveco CURSOR
• Iveco EDC7
• Iveco NEF
• Iveco Vector8
• Cummins CM2350
• Cummins CM2880
• Cummins CM2358
• DDEC III
• DDEC IV
• Deutz EMR 2
• Deutz EMR 3
• Deutz EMR 5
• Doosan MD1
• Kubota stage V
• MAN EMC Step 2.0
• MAN EMC Step 2.5
• MTU ECU8
• MTU ECU9
• Caterpillar ADEM 3
• Caterpillar ADEM 4
• Caterpillar ADEM Generic
• Perkins ADEM 3
• Perkins Generic
• Perkins StV 1200
• Perkins StV 400
• Volvo Penta EDC 3 (1500)
• Volvo Penta EDC 4 (1500)
• Volvo Penta EDC 3 (1800)
• Volvo Penta EDC 4 (1800)
• Volvo Penta EMS 2.3
• Volvo Penta EMS 2.4
• Weichai Gas
• Baudouin Wise10B
• Weichai Wise10B
• Weichai Wise15
• Yuchai diesel
• Yuchai gas
• VE E483/E694 CPCB IV

 

Changes:

• Fixed issue with mains timer.

R14.07

11/12/2023

SGC 420 Mk ll offline firmware initial release. R12.00 was the initial release for the SGC Mk ll variants. All previous releases were over smart flash.

New feature:

• Added EIC - DDDEC protocol.
• Added EIC - John Deere protocol.
• Added EIC - John Deere Stage V Protocol.
• Added EIC - Scania S8 protocol.
• Added EIC - Kohler KDI3404 protocol.
• Added EIC - Bosch EDC17CV54 protocol.
• Added auto start and stop inhibit inputs.
• Added short to battery to sensors 3 and 4.
• Implemented Quick Flash (without config mode) for M-Logic.

 

Changes:

• Updated start sequence to avoid breaker closure before safety monitoring expires.
• Removed the status screen lock during the start and stop sequences.
• Removed duplicated strings from display language pack.
• Removed duplicated strings from language pack.

Como sempre, recomendamos a instalação dos aprimoramentos oferecidos para que você possa desfrutar totalmente do seu produto DEIF.

Todos os softwares aprimorados podem ser baixados, à sua conveniência e de maneira gratuita pelo site www.deif.com sob a opção “Software” e, em seguida, “Software Download”.

Em caso de dúvidas ou se enfrentar problemas para encontrar o software relevante para o seu produto, fique à vontade para contatar a DEIF A/S pelo telefone + 45 96149614 ou no escritório local da DEIF. Como alternativa, você pode enviar um e-mail para support@deif.com. Estamos sempre prontos para ajudar!