SGC 120 MkII Firmware

SGC 120 MkII Firmware

You have chosen to download our software.

Within a few seconds, you will receive an email containing a download link.

Having trouble using the software? Please contact support@deif.com. 

Best regards, 

DEIF A/S

The software is subject to copyright DEIF A/S
By following the above mentioned link and downloading the file you automatically accept DEIF A/S copyright and license agreement (EULA). The license agreement can be found on www.deif.com/software

R16.00

New features

  • Added 0-5V sensor selection for pin 23.
  • Added Custom Sensor.
  • Added Activation & Delay for Custom Sensors.
  • EIC: Added support for Baudouin Gas.
  • EIC: Added support for Baudouin Wise10B.
  • EIC: Added support for Caterpillar ADEM 6.
  • EIC: Added support for Deutz EMR 5 Stage V.
  • EIC: Added support for Doosan Stage V.
  • EIC: Added support for Generic CPCB IV.
  • EIC: Added support for Isuzu.
  • EIC: Added support for Iveco Stage V.
  • EIC: Added support for JCB.
  • EIC: Added support for JCB 430/448 Stage V.
  • EIC: Added support for Jichai JC15D Weifu.
  • EIC: Added support for Jichai JC15T JG.
  • EIC: Added support for Jichai JC190.
  • EIC: Added support for Jichai WYS.
  • EIC: Added support for Jing guan.
  • EIC: Added support for John Deere.
  • EIC: Added support for John Deere Stage V.
  • EIC: Added support for Kohler.
  • EIC: Added support for MAN.
  • EIC: Added support for MAN EMC Step 2.0.
  • EIC: Added support for MAN EMC Step 2.5.
  • EIC: Added support for Perkins CPCB IV.
  • EIC: Added support for Perkins Stage V 120xJ.
  • EIC: Added support for PSI.
  • EIC: Added support for  Scania EMS2 S6.
  • EIC: Added support for Weichai Diesel.
  • EIC: Added support for Weichai e6gas.
  • EIC: Added support for Weichai Gas.
  • EIC: Added support for Weichai Wise10B.
  • EIC: Added support for Weichai Wise15.
  • EIC: Added support for Yuchai.
  • EIC: Added support for Generic CPCB4 +.
  • Added Auto Load Transfer In Manual for Mains as a separate parameter.
  • New Data added over Modbus. 

Changes

  • Interlock of breaker feedback added as an interlock for Contactor latching of Generator and Mains.
  • The breaker on the display now mimics the contractor feedback.
  • Limited Counter Reset removed. The user can now reset any change multiple times with a password.

R16.00

15/10/2024

New features

  • Added 0-5V sensor selection for pin 23.
  • Added Custom Sensor.
  • Added Activation & Delay for Custom Sensors.
  • EIC: Added support for Baudouin Gas.
  • EIC: Added support for Baudouin Wise10B.
  • EIC: Added support for Caterpillar ADEM 6.
  • EIC: Added support for Deutz EMR 5 Stage V.
  • EIC: Added support for Doosan Stage V.
  • EIC: Added support for Generic CPCB IV.
  • EIC: Added support for Isuzu.
  • EIC: Added support for Iveco Stage V.
  • EIC: Added support for JCB.
  • EIC: Added support for JCB 430/448 Stage V.
  • EIC: Added support for Jichai JC15D Weifu.
  • EIC: Added support for Jichai JC15T JG.
  • EIC: Added support for Jichai JC190.
  • EIC: Added support for Jichai WYS.
  • EIC: Added support for Jing guan.
  • EIC: Added support for John Deere.
  • EIC: Added support for John Deere Stage V.
  • EIC: Added support for Kohler.
  • EIC: Added support for MAN.
  • EIC: Added support for MAN EMC Step 2.0.
  • EIC: Added support for MAN EMC Step 2.5.
  • EIC: Added support for Perkins CPCB IV.
  • EIC: Added support for Perkins Stage V 120xJ.
  • EIC: Added support for PSI.
  • EIC: Added support for  Scania EMS2 S6.
  • EIC: Added support for Weichai Diesel.
  • EIC: Added support for Weichai e6gas.
  • EIC: Added support for Weichai Gas.
  • EIC: Added support for Weichai Wise10B.
  • EIC: Added support for Weichai Wise15.
  • EIC: Added support for Yuchai.
  • EIC: Added support for Generic CPCB4 +.
  • Added Auto Load Transfer In Manual for Mains as a separate parameter.
  • New Data added over Modbus. 

Changes

  • Interlock of breaker feedback added as an interlock for Contactor latching of Generator and Mains.
  • The breaker on the display now mimics the contractor feedback.
  • Limited Counter Reset removed. The user can now reset any change multiple times with a password.

R15.00

24/04/2024

New feature

• New engine protocol added:
  - Angle
  - Baudouin Wise10B
  - Baudouin Wise15
  - CAT ADEM6
  - Caterpillar ADEM 3
  - Caterpillar ADEM 4
  - Caterpillar ADEM Generic
  - Cummins CM2350
  - Cummins CM2358
  - Cummins CM2850
  - Cummins CM2880
  - Cummins KTA19
  - DDEC III
  - DDEC IV
  - Deutz EMR 2
  - Deutz EMR 3
  - Deutz EMR 4
  - Deutz EMR 5
  - Deutz EMR Stage V
  - Doosan G2 EDC17
  - Doosan MD1
  - Doosan Stage V
  - FPT EDC17
  - FPT Stage V
  - Hatz EDC17
  - Isuzu
  - Iveco CURSOR
  - Iveco EDC7
  - Iveco NEF
  - Iveco Stage V
  - Iveco Vector8
  - JCB
  - JCB 430 448 Stage V
  - Jichai JC15D WEIFU
  - Jichai JC15T JG
  - Jichai JC190
  - Jichai WYS
  - Jing Guan
  - Kohler
  - Kubota stage V
  - MAN
  - MAN EDC17
  - MAN EMC Step 2.0
  - MAN EMC Step 2.5
  - MTU ECU8
  - MTU ECU9
  - MTU J1939
  - Perkins ADEM 3
  - Perkins EDC17C49
  - Perkins Generic
  - Perkins Stage V
  - Perkins Stage V 1204J
  - Perkins StV 1200
  - Perkins StV 400
  - PSI
  - SDEC
  - Steyr EDC17
  - VE E483/E694 CPCB IV
  - Volvo Penta EDC 3 (1500)
  - Volvo Penta EDC 3 (1800)
  - Volvo Penta EDC 4 (1500)
  - Volvo Penta EDC 4 (1800)
  - Volvo Penta EMS 2.3
  - Volvo Penta EMS 2.4
  - Volvo Penta EMS2
  - Volvo Stage V
  - Weichai E6 gas
  - Weichai Gas
  - Weichai Wise10B
  - Weichai Wise15
  - Xichai Gas
  - YANMAR EDC17
  - Yanmar Stage V
  - Yuchai diesel
  - Yuchai gas
  - Yuchai Stage V
  - Yuchai YC-BCR
• Digital input H polarity reversed.
• Data for unavailable sensor is not visible from the EIC view page.
• External EGR support over digital input added.

R14.01

11/12/2023

SGC 120 Mk ll offline firmware initial release. R12.00 was the initial release for the SGC Mk ll variants. All previous releases were over smart flash.

New feature:

• Config and M-Logic flashing in live mode.
• Read event log in live mode.
• Added digital input sources in M-Logic.

 

Changes:

• Updated start sequence to avoid breaker closure before safety monitoring expires.
• Updated the protection configuration range.
• Removed duplicated strings from language pack.

Como sempre, recomendamos a instalação dos aprimoramentos oferecidos para que você possa desfrutar totalmente do seu produto DEIF.

Todos os softwares aprimorados podem ser baixados, à sua conveniência e de maneira gratuita pelo site www.deif.com sob a opção “Software” e, em seguida, “Software Download”.

Em caso de dúvidas ou se enfrentar problemas para encontrar o software relevante para o seu produto, fique à vontade para contatar a DEIF A/S pelo telefone + 45 96149614 ou no escritório local da DEIF. Como alternativa, você pode enviar um e-mail para support@deif.com. Estamos sempre prontos para ajudar!