Multi-line 2 AGC Application Software series 2.x.

2.40.9

01/07/2015

Corrections:

• Update of self-check functionality

2.40.8

16/03/2015

Corrections:

• Update of self-check functionality
• Vector jump calculation improved
• Zero sequence alarms improved

2.40.7

11/03/2011

• Improved handling of Running hour counter.

2.40.6

10/03/2009

• Support of reverse vdo input 104
• Modified power indication in display

2.40.5

05/11/2008

ModeShift handling updated

2.40.4

14/05/2007

Changes:

• Updates made in Engine communication.
• Updates made in power ramp functionality.

2.40.3

16/03/2007

Updates made in Island mode.

2.40.2

21/12/2006

Updates made in TB handling.

2.40.1

29/11/2006

Updates made in Variable Multi Start functionality.

2.40.0

12/10/2006

Changes:

• EF5 option implemented.

2.34.3

02/10/2006

Changes:

• C2 and A4 functionality updated.

2.34.2

06/06/2006

Changes:

• Mode shift handling in LTO updated.
• Simple test in AMF updated.
• Handling of priorities improved.

2.34.1

08/05/2006

Changes:

• Improvements made for handling MB/TB synchronization.
• Improvement made in fuel optimization priority routine.
• Breaker spring load timer functionality added.

2.33.3

27/03/2006

Changes:

• Enable/Disable of "Short time parallel" accessable via MLogic.
• Improvement made in single appl. AMF sequence when using "Start engine".
• Improvement made in G5 appl. for handling different nominal voltage level between DG's and Mains unit.

2.32.2

08/03/2006

Changes:

• 4-20mA analogue inputs on M1, M2 and M15 now supported in a mains unit.

2.33.1

02/02/2006

Changes:

• Updates made in "Close before excitation" functionality.
• MPE mode can now also be set up to import a fixed power.
• MLogic updated to apply to rules for boolean algebra.
• Updates made in single DG ramping functionality.
• Improvements made for handling switching between a parallel operation and ISLAND mode.

2.32.0

29/11/2005

Changes:

• Ramp up/down improved in G5 to obtain ramping after backsync of MB.
• SoftSync functyionality opened up.
• Updates made regarding LTO together with SoftSync.
• 2nd set of nominal settings implemetet.
• Manual control of gov/AVR increasing/decreasing added in MLogic.
• Possibility if using a start enable input added.

2.30.1

06/10/2005

Changes:

• load group handling added.
• Relay configuration updated.
• Transistor outputs for kWh and kVArh counter made configurable.
• Auto acknowledge added.
• Custom alarm inhibit added.
• Seperate synchronisation functionality implemented.
• Ramp up/down implemented in G5. Meaning whenever running parallel to mains and the power set point is altered
  Tge DG(s) will ramp to new set point.

2.30.0

05/10/2005

Changes:

• Available power1&2 Menues added for adding load gruppes.
• Relays can now be selected to either ALARM, LIMIT or HORN.
  Hereby the normal horn relay (relay11) can no be used as a
  LIMIT or HORN relay as well.
• The transistors for kWh and kVArh counter can no be selected as continues.
  This means they can be selected as having normal relay functionality (relay12 and 13).
• Auto acknowledge added. Via MLogic it is possible to set an alarm to autoacknowledge.
• Custom alarm inhibit added. Via MLogic it is possible to set an alarm to be inhibited when
  the custom alarm input (configurable) is active.
• Seperate synchronisation functionality implemented.

10.30.1

05/10/2005

Changes:

• Ramp up/down implemented in G5. Meaning whenever running parallel to mains and the power set point is altered Tge DG(s) will ramp to new set point.

2.11.5

13/06/2005

Changes:

• Use of Digital running feedback in regard to start sequence adjusted
• Mode switched using remote control (M-Logic or configurable or modbus) adjusted

2.11.4

30/05/2005

Name of downloadable zip-file corrected - software is unchanged (the name of the zip-file is corrected to 2114 - before it was wrongly named 2113)

2.11.4

27/05/2005

Changes:

• "Trip + Stop" alarm in G5 applications adjusted
• Limit relay handling adjusted
• Minor changes in menus (spelling)

2.11.3

25/05/2005

Changes:

• Changes to avoid frequency drop during deload in island mode

2.11.2

29/03/2005

Changes:

• Running detection functionality improved
• Adjustment when using German display
• Improvement of short time parallel performance
• Mains failure detection when using phase/neutral measurements adjusted
• Several minor adjustments of menus

2.11.1

04/03/2005

Changes:

• RPM measurements optimised
• Weekday manipulation is implemented
• Reset of PWM output changed
• The 'Year' indication in the log is corrected

2.11.0

21/01/2005

Changes:

• Priority routine ”Fuel optimisation” updated
• CAN alarm handling changed
• Priority routine ”Running hour” updated
• View lines updated
• Delod routine updated in SEMI AUTO mode
• Regulation reset updated
• Start next DG in case of failure updated

2.10.2

14/12/2004

Changes:

• AGC option G5: Start sequence regarding priority change adjusted

2.10.1

28/11/2004

New features:

• New language structure similar to the BGC.
• Phase - Neutral voltage trip similar to the PPU, GPU,GPC
• Derate of Pnom (Described in Designers Ref. Handb.)
• Idle run (Described in Designers Ref. Handb.)
• Master Clock (Described in Designers Ref. Handb.)
• Battery test (Described in Designers Ref. Handb.)
• Wire break detection on analogue inputs (4- 20 mA, VDO, PT100)
• External sync. start / close breaker
• Support of AGC_GER display similar to BGC 0108 display.
• New priority routine for option G5 (Fuel optimisation)
• Support of ATS (Automatic Transfer Switch) applications in option G5
• TB synchronises in LTO and AMF mode in option G5
• Modbus updated to support new GDU features
• M-Logic updated to support AOP setup

2.00.4

25/08/2004

Changes:

• Menu handling in regard to Option C1 adjusted
• The power calculation regarding loadsharing in PMS is optimised
• Menu handling in regard to Governor control adjusted
• Calculations used for scaling analogue input is optimised
• Configurable texts are adjusted in length
• Scaling of power-factor measurement in USW protocol changed
• Factory settings for emergency modified.

2.00.3

27/07/2004

Changes:

• Mains LED status improved
• Offset possibility for number of GB and MB operations are added
• Number of events in the Eventlog is increased
• Fuel relay logic is improved
• M-logic is improved regarding running detection
• Modeshift functionality improved
• Option M12 functionality improved
• Option C2 functionality improved
• GB sync function improved in ISLAND mode Single DG
• Option EF4 menu handling improved

2.00.1

05/05/2004

Changes:

• Some menus are adjusted
• Frequency control for stand alone generator improved
• Governor control when operating the breaker is improved
• Improvement of low voltage BB-measurements

2.00.0

14/04/2004

New features:

• PMS-functionality added
• BLOCK-mode implemented
• Support of GSM communication

Changes:

• New menu-structure implemented
• Mod-bus and Profi-bus protocols changed
• Changed numbering of all inputs