Versatile and intuitive, DEIF’s multi-instrument MIC-2 MKII DIN is perfectly suited for monitoring and analysis of all types of power systems and fitted for DIN rail mounting.
The MIC-2 MKII DIN helps you optimise your energy system. Capable of logging all applications from single low voltage to multiple high voltage applications, the sturdy unit completes your SCADA system overview.
A microprocessor-based measuring unit for most electrical quantities on 2-phase or 3-phase electric energy distribution networks, readings are transferred via Modbus or Profibus communication to your SCADA system.
Fitted with the Ethernet TCP/IP module, the unit offers direct access to Modbus data and is easy to access remotely via standard browsers.
KWh counter reset and change of settings can be password-protected, and using DEIF’s free utility software it is a simple and fast job to configure and adapt the unit to fit most applications.
You might also like
Multi-functional protection relay MTR-4P
- Up to 1,000 V L-L AC voltage input
- Up to 20 A AC current input
- Accuracy class: 0.5
- Password protection
- Trip time typically below 50 ms
- Two-stage trip setting
- Start-up delay
- 13 different protection functions
- RS-485 serial Modbus communication
- Fast and simple commissioning and setup from M-set
- Universal power supply of 20 to 300 V DC/48 to 276 V AC
- Marine approval by GL/DNV
MTR-4 Multi-transducer MTR-4
- Suitable for all 1- and 3-phase network topologies
- Up to 1,000 VL-L AC input
- Accuracy class: 0.5 or 0.4
- Up to 4 analogue outputs
- Fast response time, less than 50 ms
- Measures more than 50 parameters
- RS-485 serial Modbus communication
- Fully configurable by USB, no aux. supply required
- Universal power supply of 20 to 300 V DC/48 to 276 V AC
Transdutores unificados TAS-311DG
- Mede tensão, corrente, frequência, ângulo de fase,potência, potência reativa ou corrente bidirecional em redes de CA
- Medições classe 0,5
- Fornece e mede tensões de até 690 V
- Pré-configuração ou fácil configuração da ferramenta do PC
- Características de saída não-linear
Transdutores unificados TAS-331DG
- Mede tensão, corrente, frequência, ângulo de fase, potência, potência reativa ou corrente bidirecional em redes de CA
- Medições classe 0,5
- Fornece e mede tensões de até 690 V
- Pré-configuração ou fácil configuração da ferramenta do PC
- Características de saída não-linear