The AGC 150 Hybrid is designed for protection and control of a hybrid installation with PV energy and genset.
The AGC 150 Hybrid comes with all the necessary functions for protection and control of a hybrid installation with PV and genset. The controller is ideal for small and medium PV plants with up to 16 inverters, e.g. rooftop PV plants.
When mounted on the genset, the AGC 150 Hybrid controls the PV power and functions as a dedicated hybrid controller. The AGC 150 can also be applied as a stand-alone controller, interlinking the PV inverters and genset controller.
The AGC 150 Hybrid controls up to 2 gensets for synchronising or non-synchronising projects, in island or parallel to the mains modes. The AGC 150 Hybrid handles the power production from the PV inverters and genset to give the highest PV penetration and the lowest CO2 emission.
To ensure a sufficient minimum genset load, the AGC 150 Hybrid supports the load with PV power in a safe an and reliable way.
AGC 150: Easy and safe to use
Get access to important genset information quickly via the sunlight readable LCD.
The controller features illuminated buttons that smoothly guide the operator and make it very easy and intuitive to operate. Only buttons relevant for a function are visible to the user. Get easy access to the most common functions with configurable shortcuts.
The AGC 150 provides up to three levels (customer, service, and master) of password-protected and role-based access. Configure parameters for each level and have only relevant settings displayed.
AGC 150: Built to last – also in green energy applications
The AGC 150 comes with uncompromising quality. The controller is made of robust materials and is built to last. It has undergone several tests showing that it stands wear and tear in all types of harsh environments.
Other AGC 150 variants
- The AGC 150 Mains controller can synchronise one or two breakers (mains breaker and tie breaker) plus protect and monitor the utility.
- The AGC 150 Genset controller containing all necessary functions for control and protection of a genset. The slim design makes the genset controller suitable for paralleling even small gensets thus the AGC 150 is integrable in nearly all types of gensets.
- The AGC 150 Stand alone controller for controlling non synchronising applications with all the necessary functions for genset protection. It stands out for its reliability and operator-friendliness.
- The AGC 150 BTB controller can synchronise one breaker, protect and monitor the busbar. In total, DEIF’s power management system can handle eight bus tie breakers.
- The AGC 150 Engine Drive controller provides engine protection and controls engine start and stop sequences, including simple fixed- and variable speed functions for pump applications.
- The AGC 150 Remote Display unit provides access and control of any master controller in the AGC 150 series over the local network. This provides fast incident response and operational convenience.
- The AGC 150 PMS Lite controller is ideal for setting up and operating simple power management systems in off-grid plants with up to 128 gensets.
-
Contact us to discuss your options
- 90 years of energy pioneering
- Manufactured at the highest standards
- Superior quality
- Unmatched service and support
- Made in Denmark
Product videos
Products
AGC 150 - Plug’n’play genset controller in slim design
The AGC 150 - Flexible solutions for a wide range of power and engine control applications (update)
AGC150 - HARDWARE
AGC150 - LED MIMIC
AGC150 - TUTORIAL
AGC150 - MUDAR FORMA DE VISUALIZAR PARAMETROS
Other videos
DEIF - Hybrid Solutions
Insight
- Visualised solution overview via customisable dashboard
- World map overview and GPS tracking
- Alarm notifications (email)
- Reports (PDF, CSV)
- Fleet management (unit grouping & scheduling)
- Flexible user/team management and user permissions
- Two factor verification for enhanced security
- Templates for selected DEIF products
Dashboards widgets
- Direct value visualisation
- Multiple options of guages
- World map overview
- Group data in lists
- Show latest notifications
- Trending with graphs
Responsive web service
- Designed for portable devices
- Works with most popular browsers
- Requires Insight subscription plan
Carregador de bateria DBC-1
- Recursos de proteção eletrônica e automática
- Reinicialização automática após condição de falha
- Relé de alarme
- Redução automática de potência de saída para ambientes
- com altas temperaturas
- LED de indicação de falhas, impulsionar operações normais e de carga
- Modo de reforço
- Tensão de saída ajustável
- Sem peças móveis - sem manutenção
Digital voltage controller DVC 550
- Unique CANbus integration between DVC 550 and AGC genset controller
- Start management capability with start on threshold, soft start and close before excitation (run-up sync)
- Intelligent drying and ventilation mode for generators
- Short circuit limitation
- Loss of voltage sensing alarm
- Over/under excitation limitation
- Optimises genset performance and size using engine help functions
- Load acceptance module (LAM) assists the generator during heavy loads
- Negative forcing to avoid voltage peak during load sheddin
- U/F ramp
- Soft voltage recovery
- Stator current limitation
- Settings from AGC genset controller shared with the DVC 550 via CANbus
- Grid code compliant VDE410 and VDE4105
Flexible ESS controller ASC 150 Storage
Single controller:
- Useful for rental and brownfield applications
- Automatically charges and discharges the ESS
- Optimises the diesel genset load for high efficiency and low carbon footprint
- Requires power measurement and breaker feedback for other power sources
- Only one source: Can use the controller's 4th current measurement.
- Multiple power sources: Measurements from:
- Genset controllers (DEIF or third parties)
- Power meters
- Transducers -
Power management communication is not required
Power management:
- Automatically charges and discharges the ESS
- Automatically uses the ESS as spinning reserve for PV and microgrids
- Automatically starts and stops generators
- Automatically closes and opens breakers
- Optimises the diesel genset load for high efficiency and low carbon footprint
- Optimises the fuel consumption
- Balances the loads in the system
- Uses the plant logic
- Makes sure that the system is safe
Flexible PV controller ASC 150 Solar
Single controller
- Useful for brownfield applications
- Makes sure that there is a minimum genset load
- Optimises the diesel genset load for high efficiency and low carbon footprint
Power management
- Automatically maximises PV power
- Automatically Load-dependent start and stop generators
- Automatically closes and opens breakers
- Optimises the diesel genset load for high efficiency and low carbon footprint
- Balances the loads in the system
Off-grid applications
- With a genset:
The controller uses the genset power measurements to calculate the set points for the PV power.
- With storage:
The controller combines the available PV power with the charge/discharge scheme to determine the set point for the PV power.
Grid-tied applications
- Feed surplus PV energy to the grid
- Charge the energy storage system (ESS)
- Regulate PV production to match the self-consumption
Automatic sustainable controller ASC-4 Solar
- Solar, storage, wind, Mains and genset integration in hybrid applications
- ASC-4 sustainable controllers and AGC-4 Mk II/AGC 150 let you control up to 32 gensets
- Simple graphical configuration
- Uptime guaranteed through spinning reserve
- Maximised sustainable power penetration
- Load dependent genset start/stop
- Minimum genset load constraint
- Ideal for self-consumption applications
- Highly customisable with user-friendly M-Logic tool
- Control of breaker
- Record time commissioning with DEIF Emulation
- uses and verifies the functions of the real system for test, production and design - Suitable for power management solutions fitted with AGC-4, AGC 150 or AGC 200 genset controllers
- Suitable for stand-alone solutions using multi-instruments such as DEIF’s MIB or MIC
Automatic Sustainable Controller ASC-4 Battery
- Solar, storage, wind, Mains and genset integration in hybrid applications
- ASC-4 sustainable controllers and AGC-4 Mk II/AGC 150 let you control up to 32 gensets
- Applications with up to 16 sustainable power plants
- Simple graphical configuration
- Communicates with BCU, BMS, or PCS over Modbus
- Charging/discharging based on SOC or Schedular Command timers
- Optimal genset load constraint
- Define and change priority of connected power sources
- Controls functions, energy source or power source
- Grid-forming, grid-following, or droop mode (virtual synchronous generator)
- Uptime guaranteed through spinning reserve
- Maximised sustainable power penetration
- Load dependent genset start/stop by PMS or DO
- SOC dependent genset start/stop by DO - Rental
- Minimum genset load constraint
- Ideal for self-consumption applications
- Highly customisable with user-friendly M-Logic tool
- Control of breaker
- Record time commissioning with DEIF Emulation
- uses and verifies the functions of the real system for test, production and design - Suitable for power management solutions fitted with AGC-4, AGC 150 or AGC 200 genset controllers
- Suitable for stand-alone solutions using multi-instruments such as DEIF’s MIB or MIC
